If potassium hydroxide is not used for a long time, if we can not ensure its storage environment, it will lead to the influence of moisture and moisture on the affected products. In addition, oxygen and water in the air are easy to produce bonding problems. Once the products are bonded for future use, the effect will be reduced. Therefore, we must pay attention to the protection of operation, so we can easily understand the cause of caking.

1、吸湿结块。

1. Moisture absorption and caking.

氢氧化钾包装采用双层包装袋，如果缝不够快或缝不够严，产品在包装袋内容易吸潮，影响其质量。为此，将原来的单缝改为双缝，并要求包装人员检查装夹、缝合等工序，以达到很大程度的隔离空气，大大减少了由于结块问题而导致的密封松动的发生。

Potassium hydroxide is packed in double-layer bags. If the seam is not fast or tight enough, the product is easy to absorb moisture in the bag, affecting its quality. Therefore, the original single seam is changed to double seam, and the packaging personnel are required to check the clamping, sewing and other processes, so as to isolate the air to a great extent and greatly reduce the occurrence of loose seal caused by caking.

2.受温度的影响。

2. Affected by temperature.

氢氧化钾的温度是由汽包的冷却水流量和汽包的转速决定的。循环水的体积、循环水的温度、料筒中的喷嘴是否堵塞、料筒是否结垢直接影响产品的温度，并严重影响机械下料温度的均匀性。清洗喷嘴后，清洗桶内水垢，增加循环水体积，将产品温度从63c-66c降58C。通过降低冲裁温度，可以减轻结块现象。

The temperature of potassium hydroxide is determined by the cooling water flow of the steam drum and the rotating speed of the steam drum. The volume of circulating water, the temperature of circulating water, whether the nozzle in the barrel is blocked and whether the barrel is scaling directly affect the product temperature and seriously affect the uniformity of mechanical blanking temperature. After cleaning the nozzle, clean the scale in the barrel, increase the volume of circulating water and reduce the product temperature from 63c-66c to 58c. The caking phenomenon can be reduced by reducing the blanking temperature.

氢氧化钾粘结的原因有很多种,与环境的关系,温度,有非常大的,所以我们应该特别注意这两个方面,为了避免影响我们的使用,对其日常保护和存储需要考虑很多因素,每个链接不能草率,毕竟,它的质量也影响使用效率的基本因素之一。

There are many reasons for the bonding of potassium hydroxide, which has a great relationship with the environment and temperature, so we should pay special attention to these two aspects. In order to avoid affecting our use, many factors need to be considered for its daily protection and storage. Each link cannot be hasty. After all, its quality is also one of the basic factors affecting the use efficiency.