我们知道氢氧化钾的用途很广，但是工业氢氧化钾作为一种化学品，我们需要非常注意包装、储存和运输，因为它也直接影响到产品的质量是否完好，受到影响。那么要如何来包装储运呢？

We know that potassium hydroxide is widely used, but as a chemical, we need to pay great attention to packaging, storage and transportation, because it also directly affects the integrity of product quality. So how to package, store and transport?

包装储运：氢氧化钾一般采用25kg三层塑料编织袋，内外层为塑料编织袋，中层为塑料内膜袋。氢氧化钾应该在通风干燥的库房或棚屋。包装容器应完整、密封。不要与易燃品和酸类一起储存和运输。运输过程中注意防潮防雨。发生火灾时，可用水、沙子及各种灭火器灭火，但消防人员应注意水中溶解的烧碱的腐蚀性。

Packaging, storage and transportation: 25kg three-layer plastic woven bags are generally used for potassium hydroxide, the inner and outer layers are plastic woven bags, and the middle layer is plastic inner membrane bags. Potassium hydroxide should be stored in a ventilated and dry warehouse or shed. The packaging container shall be complete and sealed. Do not store and transport with inflammables and acids. Pay attention to moisture and rain during transportation. In case of fire, water, sand and various fire extinguishers can be used to put out the fire, but firefighters should pay attention to the corrosivity of caustic soda dissolved in water.

固体氢氧化钾贮存：注意密封，防止暴露在空气中吸潮、潮解或与二氧化碳接触。在玻璃瓶中盛放氢氧化钾或其他形式的氢氧化钾时，不宜使用玻璃塞，而应使用橡胶塞，因为氢氧化钾与玻璃中的二氧化硅反应生成硅酸钠，使塞与塞之间的键合而且瓶子很难打开。

Storage of solid potassium hydroxide: pay attention to sealing to prevent moisture absorption, deliquescence or contact with carbon dioxide when exposed to air. When potassium hydroxide or other forms of potassium hydroxide are contained in the glass bottle, the glass plug should not be used, but the rubber plug should be used, because the potassium hydroxide reacts with the silica in the glass to form sodium silicate, which makes the bond between the plug and the plug, and it is difficult to open the bottle.

工业氢氧化钾虽然应用广泛，但其理化性质具有一些不适合密切接触的性质和化学性质，如腐蚀性等。因此，切记按照执行标准和规范进行包装、储存和运输安排，以确保不发生泄漏事故、人身伤害和经济损失。

Although industrial potassium hydroxide is widely used, its physical and chemical properties have some properties that are not suitable for close contact and chemical properties, such as corrosivity. Therefore, remember to make packaging, storage and transportation arrangements in accordance with the Executive Standards and specifications to ensure that leakage accidents, personal injuries and economic losses do not occur.

此外，氢氧化钾具有很强的腐蚀性，但可用于不同的场合，应用范围很广。对员工的要求不只体现在生产过程中，而且在生产之后，对包装员工也有一些详细的要求。比如：

In addition, potassium hydroxide has strong corrosivity, but it can be used in different occasions and has a wide range of applications. The requirements for employees are not only reflected in the production process, but also after production, there are some detailed requirements for packaging employees. For example:

工作前穿戴劳动防护用品；先检查缝纫机工作是否正常；将袋子放入工作区；打开电子泵电源开关；开始包装，将氢氧化钾借入包装袋，用缝纫机将包装出口密封；将包装好的氢氧化钾放入仓库，依次放置自然冷却。浇筑时，应根据氢氧化钾的颜色进行浇筑。等等。

Wear labor protection articles before work; First check whether the sewing machine works normally; Put the bag into the work area; Turn on the power switch of the electronic pump; Start packaging, borrow potassium hydroxide into the packaging bag, and seal the packaging outlet with a sewing machine; Put the packed potassium hydroxide into the warehouse and place it in turn for natural cooling. When pouring, it shall be poured according to the color of potassium hydroxide. wait.

安排工业氢氧化钾的包装储运要注重的相关事项便是这样了，如果您对此有什么要讲的可以关注网站www.jinhao360.com来联系我们分享交流。

This is what should be paid attention to when arranging the packaging, storage and transportation of industrial potassium hydroxide. If you have anything to say about it, you can pay attention to the website www.jinhao360 Com to contact us to share and exchange.