成品氢氧化钾的存在形式一般为各种形状，如片状、颗粒状等。所以使用时溶解起来比堵塞更方便。所以我们在使用时对成品的要求往往更高。因为切片质量影响使用时的溶出率，所以对产品的切片工艺有严格的标准。

The finished potassium hydroxide generally exists in various shapes, such as flake, granule, etc. Therefore, it is more convenient to dissolve than to block. Therefore, we often have higher requirements for finished products when using them. Because the quality of the slice affects the dissolution rate in use, there are strict standards for the slicing process of the product.

1.先要保证氢氧化钾切片后的产品横截面位置比较完整，没有一些明显的缺口和凸起，表面很少有刀痕和由于切片处理而产生的裂纹。

1. First, ensure that the cross section position of the product after potassium hydroxide slicing is relatively complete, without some obvious notches and bulges, and there are few knife marks and cracks caused by slicing on the surface.

2.切片时还要求精度高，包括来自切割的产品厚度差要求在一定范围内，切割结束后不能有氢氧化钾翘起

2. When slicing, it is also required to have high precision, including that the thickness difference of products from cutting should be within a certain range, and there should be no potassium hydroxide rising after cutting

3.很多产品在切片的时候会有一些不合格的产品，但是我们在加工的时候需要尽可能的提高合格的概率，这样我们的效率才会显著提高。

3. Many products will have some unqualified products when slicing, but we need to improve the probability of qualified products as much as possible during processing, so that our efficiency will be significantly improved.

4.切片时，我们可以选择更高的设备进行加工，这样加工的效率就会提高。而且可以降低原材料的消耗。

4. When slicing, we can choose higher equipment for processing, so that the processing efficiency will be improved. It can also reduce the consumption of raw materials.

以上是氢氧化钾切片的标准，因为如果我们使用的产品切片效果更好，我们使用时也会有更好的溶解效果。更多相关产品的内容就来我们网站http://www.jinhao360.com进行咨询吧！

The above is the standard for potassium hydroxide slicing, because if we use the product with better slicing effect, we will also have better dissolution effect when using it. More relevant product content will come to our website http://www.jinhao360.com Consult!