硼酸蒸馏

Boric acid distillation

1、硼酸在蒸馏过程中要严格控制好蒸馏温度即要控制好蒸汽的加入量。

1. During the distillation of boric acid, the distillation temperature should be strictly controlled, that is, the amount of steam should be controlled.

2、如果蒸汽量过大导致温度偏高，就要将高沸点物质从塔顶带出，否则就会造成硼酸不纯。

2. If the temperature is too high due to excessive steam volume, the high boiling point material shall be taken out of the tower top, otherwise the boric acid will be impure.

3、蒸汽量过小的话就会导致温度偏低、硼酸的蒸馏缓慢进而影响进度。

3. If the steam volume is too small, the temperature will be low, and the distillation of boric acid will be slow, which will affect the progress.

4、蒸馏过程中一定要保持操作的平稳，应避免蒸馏釜发生冲釜从而加长操作周期、增加操作费用、影响产品质量。

4. During the distillation process, it is necessary to keep the operation stable, and avoid the occurrence of retort flushing, which will prolong the operation cycle, increase the operation cost, and affect the product quality.

使用硼酸溶液：

Use boric acid solution:

1、所用硼酸溶液的温度不得高于室内温度。

1. The temperature of boric acid solution used shall not be higher than the indoor temperature.

2、应定时更换湿润纱布以保持适宜的温度、湿度和无菌。

2. The wet gauze should be replaced regularly to maintain proper temperature, humidity and sterility.

3、当皮肤的皮损面积较大，尤其有糜烂时不宜用本药湿敷以免硼酸大量吸收后引起毒性反应如呕吐、腹泻、痉挛、昏睡、失明及肾损害等，宜改用1∶8000高锰酸钾溶液湿敷且等皮损面无感染时可用生理盐水湿敷。

3. When the skin lesion area is large, especially when there is erosion, this drug should not be wet applied to avoid toxic reactions such as vomiting, diarrhea, convulsion, lethargy, blindness and kidney damage caused by the absorption of a large amount of boric acid. It should be wet applied with 1 ∶ 8000 potassium permanganate solution and can be wet applied with physiological saline when there is no infection on the skin lesion.

4、天冷时湿敷硼酸溶液时应注意保暖。

4. Pay attention to keeping warm when wet applying boric acid solution in cold weather.

为了保证产品的使用我们一定要多加关注上述所提出的注意事项，并且为了能够充分发挥硼酸溶液的、消肿、、收敛及清洁创面作用一定要按照规定的方法来使用来更好地发挥出产品的特性！关注我们http://www.jinhao360.com，了解更多产品事项！

In order to ensure the use of the product, we must pay more attention to the precautions mentioned above, and in order to give full play to the anti-inflammatory, swelling, antibacterial, astringent and wound cleaning effects of boric acid solution, we must use it in accordance with the specified methods to better play to the characteristics of the product! Follow us http://www.jinhao360.com , learn more about product matters!