氢氧化钾主要用于基本的化工原料.医药.日用化工等，有很强的碱性和腐蚀性.在使用过程中必须谨慎。那么大家对其在生产过程中要注意哪些有多少了解？下面就为大家作一个介绍。

Potassium hydroxide is mainly used for basic chemical raw materials, pharmaceuticals, daily chemicals, etc. It has strong alkalinity and corrosivity. It must be carefully used. So how much do you know about what you should pay attention to in the production process? Let me introduce you.

1.生产氢氧化钾的工作人员应穿工作服，戴防尘面罩，防护眼镜和手套。

1. Workers who produce potassium hydroxide should wear work clothes, dust masks, protective glasses and gloves.

2.产品制造车间应保持密封，但也要注意通风。

2. The product manufacturing workshop should be sealed, but also pay attention to ventilation.

3.如果发生氢氧化钾泄漏，一定要用干石灰或苏打灰混合，在合适的地点埋葬。

3. If potassium hydroxide leaks, it must be mixed with dry lime or soda ash and buried in a suitable place.

4.提醒大家，每天工作结束后，必须及时进行淋浴更衣，保持卫生。

4. Remind everyone that after work every day, you must take a shower and change clothes in time to keep clean.

化学药品使用时要采取相应的措施，特别是接触到氢氧化钾等强碱，有助于操作者将皮肤与产品的直接接触。为了保证使用，还应采取以下措施：

Appropriate measures should be taken when chemicals are used, especially when they are exposed to strong alkalis such as potassium hydroxide, which will help the operator to directly contact the skin with the product. In order to ensure safe use, the following measures should also be taken:

1.穿橡胶、耐酸碱的衣服，戴橡胶耐酸碱手套。

1. Wear rubber, acid-alkali resistant clothing and rubber acid-alkali resistant gloves.

2.远离可燃性的可燃物。不要接触酸，CO2，过氧化氢。

2. Keep away from combustible materials. Do not contact acid, CO2, hydrogen peroxide.

3.密封包装，防止损坏。

3. Seal the package to prevent damage.

4.装有紧急泄漏处理设备。

4. Emergency leakage treatment equipment is installed.

5.操作后彻底清洗接触的身体部位。

5. Thoroughly clean the body parts after operation.

6.工作地点不能吃东西.喝水和抽烟。

6. Do not eat, drink or smoke at the workplace.

7.禁止排放环境。

7. It is prohibited to discharge the environment.

值得注意的是，氢氧化钾会腐蚀金属，所以在包装时不能使用金属物品，使用时应采用隔离包装，以保证产品包装。更多相关产品使用问题就来我们网站http://www.jinhao360.com咨询！

It is worth noting that potassium hydroxide will corrode metal, so metal articles cannot be used in packaging, and isolation packaging should be used to ensure product packaging safety. More questions about the use of related products can be found on our website http://www.jinhao360.com consulting service